> For the complete documentation index, see [llms.txt](https://docs.filliquid.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.filliquid.io/zh/testnet-user-manual/beginning-the-testing.md).

# Beginning The Testing

Now that your wallet is connected to the Calibration testnet and is loaded with testnet coins, it’s time to begin testing the FILLiquid protocol. 

You can access the protocol through the following FILLiquid testnet address; 

<https://test.filliquid.io/>

The website portal can be opened through the Discover tab in the wallet, as shown in Figure 2 above.

* You will need to connect your wallet to the protocol upon entering it for the first time. Simply hit “Connect Wallet,” as shown in Figure 4.

<figure><img src="/files/F5BDfljiqGmPw5pTrg4Y" alt="" width="188"><figcaption><p>Figure 4</p></figcaption></figure>

* Next, select “TP Wallet” in the following screen (or MetaMask if you’re using that wallet)

<figure><img src="/files/E210u0E37dT3tNJu9IoO" alt="" width="188"><figcaption><p>Figure 5</p></figcaption></figure>

* The final image in Figure 6 shows a successful wallet connection.

<figure><img src="/files/gBSsMwIapR7PMftPS8WJ" alt="" width="188"><figcaption><p>Figure 6</p></figcaption></figure>